diggity designs home buttondiggity designs about buttondiggity designs products buttondiggity designs contact buttondiggity designs links button

Product NEWS
What's NEW

Diggity Designs
12th scale
On-Road
Off-Road

Li-Po Batteries
Scooters Li-Po Power Packs
RC Cars
18th Scale
Monster Trucks
Airplanes and Helicopters

Chargers
Li-Po charger
Power Supplies

Brushless
10th scale esc
18th scale esc
Brushless motors
Boat esc

Nitro
Nitro Engines
Nitro Parts

 

 

Scooters Motorworks new brushless esc and motor

The Nemesis series will be a complete series of brushless speed controllers and motors from a sport sensorless system to a full sensored race version. The Nemesis Sport is a sensorless brushless system available with 4 different motors. The Nemesis esc is a 35A sensorless speed controller that is compatible with sensorless motors like Castle, Hacker and up to the 448 from Tekin and other sensorless manufactures as well. The big advantage of the Nemesis system is PRICE. Good product at good prices. The Nemesis esc has on board programming and to make it easier the combo system includes a hand held programmer. To make dialing in your esc even easier.

Nemesis Sport Brushless 35A speed Controller.
Output: Continuous current 35A, burst current 190A.
Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo. ** 
BEC Output: 6V/1.5A.
Resistance: 0.0015 Ohm.
Motor Supported: Sensorless Brushless Motor
Size: 31.5mm x 27.5mm x 24mm
Weight: 30g (Without wires)
Speed controller is programmable from the esc or it can be programmed with the hand held program card.

Compatible with all Sensorless brushless motor.
Excellent start-up, acceleration and linearity features.
Forward reverse with reverse lockout
Motor Limit 5400KV motor
4 adjustable steps of reverse
Proportional ABS brake function with 4 adjustable steps of brake 
8 adjustable steps of drag-brake
4 steps of initial brake force adjustment.
4 adjustable start modes from "Soft" to "Very aggressive".
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Thermal protection / Throttle signal loss protection / Motor blocked protection.
8 adjustable steps of timing from 0 degrees to 28 degrees
Waterproof and dust proof
Easy onboard programming with only one button and is compatible with pocket-sized program card.
** If you are using a 3S LIPO or more than 6 Ni** batteries, you must use our optional High Voltage fan or you will burn up the factory installed fan.


Part Number
SMW-NE1000 Nemesis Sport 35A sensorless esc.

SMW-NE2001 35A, 4300KV (equal to a 9T) Sensorless motor, Program card.

SMW -NE2002 35A esc 3900KV (equal to a 10T) Sensorless motor, Program card

SMW-NE2003 35A 3300KV (equal to a 12T) Sensorless motor, Program card

SMW-NE2004 35A 3000KV (equal to a 13T) Sensorless motor, Program card.

SMW-NE3001 4300KV Sensorless brushless motor (equal to 9T brushed)

SMW-NE3002 3900KV Sensorless brushless motor (equal to 10T brushed)

SMW-NE3003 3300KV Sensorless brushless motor (equal to 12T brushed)

SMW-NE3004 3000KV Sensorless brushless motor (equal to13T brushed)

SMW-NE1000 Program card for all Nemesis speed controllers

For a test Review click here

 


Phone number:216-383-9302  e-mail:scooter@scootersmotorworks.com  Privacy Policy Terms of Use